HP 8/40 Fabric OS Message Reference v6.4.0 (53-1001767-01, June 2010) - Page 364
FW-1004, Message, Probable Cause, Recommended, Action, Severity, psShow
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 364 highlights
42 FW-1004 FW-1004 Message , [FW-1004], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the internal temperature of the switch has changed from a value outside of the acceptable range to a value within the acceptable range. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1009 Message , [FW-1009], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the state of the power supply has changed from faulty to functional, or from functional to faulty. Recommended Action If the power supply is functioning correctly, no action is required. If the power supply is functioning below the acceptable boundary, verify that it is seated correctly in the chassis. Run the psShow command to view the status of the power supply. If the power supply continues to be a problem, replace the faulty power supply. Severity INFO FW-1010 Message , [FW-1010], ,, WARNING, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the power supply is faulty. The power supply is not producing enough power. Recommended Verify that you have installed the power supply correctly and that it is correctly seated in the Action chassis. If the problem persists, replace the faulty power supply. Severity WARNING FW-1011 Message Probable Cause , [FW-1011], ,, INFO, , , is above high boundary(High=, Low=). Current value is . Indicates that the power supply is functioning properly. 288 Fabric OS Message Reference 53-1001767-01