HP 8/40 Fabric OS Message Reference v6.4.0 (53-1001767-01, June 2010) - Page 375

42 FW-1124 Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1124 Message , [FW-1124], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of domain ID changes has changed from a value outside of the acceptable range to a value within the acceptable range. Domain ID changes occur when there is a conflict of domain IDs in a single fabric and the principal switch has to assign another domain ID to the switch. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1125 Message , [FW-1125], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the number of segmentations has changed. Segmentation changes might occur due to: • Zone conflicts. • Domain conflicts. • Segmentation of the principal link between two switches. • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely, incompatible parameters result in segmentation. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1126 Message Probable Cause , [FW-1126], ,, INFO, , , is below low boundary(High=, Low=). Current value is . Indicates that the number of segmentations has fallen below the low boundary. Segmentation changes might occur due to: • Zone conflicts. Fabric OS Message Reference 299 53-1001767-01