HP 8/40 Fabric OS Message Reference v6.4.0 (53-1001767-01, June 2010) - Page 600

90 SEC-1096 Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1096 Message , [SEC-1096], ,, ERROR, , Failed to delete because . Probable Cause Indicates a policy cannot be removed because deleting it would result in invalid security policy configuration. Recommended Verify the security policy configuration requirements and remove any policies that require the policy Action you want to remove first. Severity ERROR SEC-1097 Message , [SEC-1097], ,, ERROR, , Cannot find policy set. Probable Cause Indicates the specified policy could not be found. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity ERROR SEC-1098 Message , [SEC-1098], ,, ERROR, , No FCS list. Probable Cause Indicates the specified policy could not be found. Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command Action and contact your switch service provider. Severity ERROR 524 Fabric OS Message Reference 53-1001767-01