HP 8/40 Fabric OS Message Reference v6.4.0 (53-1001767-01, June 2010) - Page 597

90 SEC-1085 SEC-1085 Message , [SEC-1085], ,, ERROR, , Failed to create . Probable Cause Indicates that the security policy was not created. Recommended Check that the current policy configuration is valid. For example, the RSNMP policy cannot exist Action without the WSNMP policy. Severity ERROR SEC-1086 Message , [SEC-1086], ,, ERROR, , The security database is too large to fit in flash. Probable Cause Indicates the security database has more data than the flash can accommodate. Recommended Reduce the number of entries in some policies to decrease the security database size. Action Severity ERROR SEC-1087 Message , [SEC-1087], ,, ERROR, , The security database is larger than the data distribution limit of fabric bytes. Probable Cause Indicates the security database has more data than can be distributed to some of the switches in the fabric. Recommended Reduce the number of entries in the security policies to decrease the security database size. Action Severity ERROR SEC-1088 Message Probable Cause , [SEC-1088], ,, ERROR, , Cannot execute the command. Please try later. Indicates there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Fabric OS Message Reference 521 53-1001767-01