HP 8/40 Fabric OS Message Reference v6.4.0 (53-1001767-01, June 2010) - Page 424
FW-1501, Message, Probable Cause, Recommended, Action, Severity, portEnable
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 424 highlights
42 FW-1501 FW-1501 Message , [FW-1501], ,, INFO, , Mail overflow cleared - alerts discarded. Probable Cause Indicates that the mail overflow condition has cleared. Recommended No action is required. Action Severity INFO FW-1510 Message , [FW-1510], ,, INFO, , threshold exceeded: Port disabled. Probable Cause It means port has been fenced because port has violated CRC, ITW, PE, C3TX_TO, ST, and LR high thresholds. Recommended Check for concurrent loss of synchronization errors. Check the SFP and the cable. Then enable the Action port using the portEnable command. Severity INFO FW-1511 Message , [FW-1511], ,, INFO, , , , has crossed lower threshold boundary to in between(High=, Low=). Current value is . Probable Cause Indicates that the number of link failures that the port experiences has changed and crossed lower threshold boundary to a value within the acceptable range. Link loss errors occur when a link experiences a loss of signal and fails. Both physical and hardware problems can cause link loss errors. Link loss errors frequently occur due to a loss of synchronization. Check for concurrent loss of synchronization errors and, if applicable, troubleshoot them. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1512 Message , [FW-1512], ,, INFO, , , , has dropped below upper threshold boundary to in between(High=, Low=). Current value is . 348 Fabric OS Message Reference 53-1001767-01