HP 8/40 Fabric OS Message Reference v6.4.0 (53-1001767-01, June 2010) - Page 585

90 SEC-1033 Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1033 Message , [SEC-1033], ,, ERROR, , Invalid character used in member parameter to add switch to SCC policy; command terminated. Probable Cause Indicates a member parameter in the secPolicyAdd command is invalid (e. g., it may include an invalid character, such as an asterisk). A valid switch identifier (a WWN, a domain ID, or a switch name) must be provided as a member parameter in the secPolicyAdd command. Only the secPolicyCreate command supports use of the asterisk for adding switches to policies. Recommended Action Run the secPolicyAdd command using a valid switch identifier (WWN, domain ID, or switch name) to add specific switches to the switch connection control (SCC) policy. Refer to the Fabric OS Command Reference for more information on the secPolicyAdd and secPolicyCreate commands. Severity ERROR SEC-1034 Message , [SEC-1034], ,, ERROR, , Invalid member . Probable Cause Indicates the input list has an invalid member. Recommended Verify the member names, and input the correct information. Action Severity ERROR SEC-1035 Message Probable Cause Recommended Action , [SEC-1035], ,, ERROR, , Invalid device WWN . Indicates the specified world wide name (WWN) is invalid. Enter the correct WWN value. Fabric OS Message Reference 509 53-1001767-01