HP 8/40 Fabric OS Message Reference v6.4.0 (53-1001767-01, June 2010) - Page 610

90 SEC-1146 Probable Cause Indicates one of the following has occurred: • The names for the specified policies have changed. • The passwords have changed for the specified accounts. • The SNMP community strings have been changed. Recommended Action Verify the security event was planned. If the security event was planned, no action is required. If the security event was not planned, take appropriate action as defined by your enterprise security policy. Severity INFO SEC-1146 Message , [SEC-1146], ,, INFO, , PID changed: . Probable Cause Indicates the PID format of the switch was changed either to extended-edge PID or from extended-edge PID. If the device connection control (DCC) polices existed, all index/area ID values either increased or decreased by 16. The values wrap around after 128. If a DCC policy contains an index/area of 127 before changing to extended-edge PID, then the new index/area is 15, because of the wraparound. Recommended No action is required. Action Severity INFO SEC-1153 Message , [SEC-1153], ,, INFO, , Error in RCA: RCS is not supported Probable Cause Indicates that reliable commit service (RCS) is not supported. Recommended Action Run the rcsInfoShow command to view RCS capability on the fabric. RCS must be capable on all switches in the fabric to be enabled. If all switches are capable, it is automatically enabled. For any switch that does not support RCS, obtain the latest firmware version from your switch supplier, and run the firmwareDownload command to upgrade the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO SEC-1154 Message , [SEC-1154], ,, INFO, , PID change failed: . 534 Fabric OS Message Reference 53-1001767-01