HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 1199

Chapter 22 Show Commands show ficon Send documentation comments to [email protected] Defaults None. Command Modes EXEC mode. Command History Release 1.3(1) 3.0(1) 3.0(2) Modification This command was introduced. • Added the port-numbers and stat options. • Added the portnumber keyword. Added the port default-state option. Usage Guidelines If FICON is not enabled on a VSAN, you will not be able to view FICON configuration information for that VSAN. Examples The following example displays configured FICON information. switch# show ficon Ficon information for VSAN 20 Ficon is online VSAN is active Host port control is Enabled Host offline control is Enabled User alert mode is Enabled SNMP port control is Enabled Host set director timestamp is Enabled Active=Saved is Disabled Number of implemented ports are 240 Key Counter is 73723 FCID last byte is 0 Date/Time is set by host to Sun Jun 26 00:04:06.991999 1904 Device allegiance is locked by Host Codepage is us-canada Saved configuration files IPL _TSIRN00 The following example displays the default prohibit state. switch# show ficon port default-state Port default state is allow-all The following example displays assigned FICON port numbers. switch# show ficon port-numbers assign ficon slot 1 assign port-numbers 0-31 ficon slot 2 assign port-numbers 32-63 ficon slot 3 assign port-numbers 64-95 ficon slot 4 assign port-numbers 96-127 ficon logical-port assign port-numbers 128-153 The following example displays port address information. switch# show ficon vsan 2 portaddress Port Address 1 is not installed in vsan 2 OL-18089-01, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Command Reference 22-131