HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 492

enrollment terminal Chapter 7 E Commands Send documentation comments to [email protected] enrollment terminal To enable manual cut-and-paste certificate enrollment through the switch console, use the enrollment terminal command in trust point configuration submode. To revert to the default certificate enrollment process, use the no form of the command. enrollment terminal no enrollment terminal Syntax Description This command has no arguments or keywords. Defaults The default enrollment method is manual cut-and-paste, which is the only enrollment method that the MDS switch currently supports. Command Modes Trust point configuration submode. Command History Release 3.0(1) Modification This command was introduced. Usage Guidelines None. Examples The following example shows how to configure trust point enrollment through the switch console: switch# config terminal switch(config)# crypto ca trustpoint admin-ca switch(config-trustpoint)# enrollment terminal The following example shows how to discard a trust point enrollment through the switch console. switch(config)# crypto ca trustpoint admin-ca switch(config-trustpoint)# no enrollment terminal Related Commands Command Description crypto ca authenticate Authenticates the certificate of the certificate authority. Cisco MDS 9000 Family Command Reference 7-6 OL-18089-01, Cisco MDS NX-OS Release 4.x