HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 1426

show santap module dvt Chapter 22 Show Commands Send documentation comments to [email protected] show santap module dvt To display the SANTap DVT configuration on the Storage Service Module (SSM), use the show santap module dvt command in the EXEC mode. show santap module slot dvt {name | brief} Syntax Description slot name brief Specifies the module number. The range is from 1 to 9. Specifies the user name for DVT. Displays SANTap DVT configuration in a brief format. Defaults None. Command Modes EXEC mode. Command History Release NX-OS 4.1(1b) Modification This command was introduced. Usage Guidelines None. Examples The following example displays the SANTap DVT configuration: switch# show santap module 2 dvt DVT Information : dvt pwwn = 22:00:00:20:37:88:20:ef dvt nwwn = 20:00:00:20:37:88:20:ef dvt id = 3 dvt mode = 3 dvt vsan = 3 dvt fp_port = 0 dvt if_index = 0x1080000 dvt name = MYDVT Related Commands Command show santap vttbl Description Displays the SANTap VTTBL configuration. 22-358 Cisco MDS 9000 Family Command Reference OL-18089-01, Cisco MDS NX-OS Release 4.x