HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 842

phone-contact Chapter 18 P Commands Send documentation comments to [email protected] phone-contact To configure the telephone contact number with the Call Home function, use the phone-contact command in Call Home configuration submode. To disable this feature, use the no form of the command. phone-contact number no phone-contact number Syntax Description number (Optional) Configures the customer's phone number. Allows up to 17 alphanumeric characters in international phone format. Note Do not use spaces. Use the + prefix before the number. Defaults None. Command Modes Call Home configuration submode. Command History Release 1.0(2) Modification This command was introduced. Usage Guidelines None. Examples The following example shows how to configure the telephone contact number with the Call Home function. switch# config terminal Enter configuration commands, one per line. End with CNTL/Z. switch(config)# callhome switch(config-callhome)# phone-contact +1-800-123-4567 Related Commands Command callhome callhome test show callhome Description Configures the Call Home function. Sends a dummy test message to the configured destination(s). Displays configured Call Home information. 18-10 Cisco MDS 9000 Family Command Reference OL-18089-01, Cisco MDS NX-OS Release 4.x