HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 1427

Chapter 22 Show Commands show santap module dvt brief Send documentation comments to [email protected] show santap module dvt brief To display the SANTap Data Virtual Target (DVT) configuration in a brief format on the Storage Service Module (SSM), use the show santap module dvt brief command in the EXEC mode. show santap module dvt brief slot Syntax Description slot Displays SANTap configuration for a module in the specified slot. Defaults None. Command Modes EXEC mode. Command History Release 3.2(1) Modification This command was introduced. Usage Guidelines None. Examples The following example displays the SANTap module DVT brief infomation for slot 13. switch# show santap module 13 dvt brief DVT WWN DVT ID MD DVT VSAN DVTIFIDX 50:06:0e:80:00:c3:e0:46 139639316 3 30 0x1604000 switch# attach module 13 Attaching to module 13 ... To exit type 'exit', to abort type '$.' Bad terminal type: "xterm". Will assume vt100. The following example displays the SANTap vttbl DVT configuration. switch# attach module 2 module-3# show santap vttbl dvt 50:00:1f:e1:50:0c:3b:09 DVT Entry : Activated : FALSE Number LUNs : 16 Possible Hosts : hi_pwwn = 10:00:00:00:c9:3f:90:21 : 4 LUNs hi_pwwn = 10:00:00:00:c9:4c:c0:e5 : 2 LUNs hi_pwwn = 21:00:00:e0:8b:0c:7d:21 : 2 LUNs hi_pwwn = 10:00:00:00:c9:56:ed:f2 : 2 LUNs hi_pwwn = 50:06:0b:00:00:60:2a:a0 : 4 LUNs hi_pwwn = 21:00:00:e0:8b:92:62:92 : 2 LUNs OL-18089-01, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Command Reference 22-359