HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 849

Chapter 18 P Commands port-monitor activate Send documentation comments to [email protected] port-monitor activate To activate the specified port monitor policy, use port-monitor activate command. To deactivate the policy, use the no form of the command. port-monitor activate [name] no port-monitor activate [name] Syntax Description name Name of RMON port policy. Defaults None. Command Modes Configuration mode. Command History Release 4.1(1b) Modification This command was introduced. Usage Guidelines If no name is given, the port-monitor activates the default policy. Presently one policy is activated on one port type. Two policies can be active but on different port-types. If the specified policy is not active, it is a redundant operation. Examples The following example shows how to activate the port monitor default policy: switch(config)# port-monitor activate switch(config)# The following example shows how to activate the port monitor cisco policy: switch(config)# port-monitor activate Cisco switch(config)# Related Commands Command show port-monitor Description Displays all port monitor policies. OL-18089-01, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Command Reference 18-17