HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 630

interface fc Chapter 11 I Commands Send documentation comments to [email protected] Command History Release 1.0(2) 2.0(x) Modification This command was introduced. Added the auto option to the channel-group keyword. Usage Guidelines You can specify a range of interfaces by issuing a command with the following example format. interfacespacefc1/1space-space5space,spacefc2/5space-space7 Refer to the Cisco MDS 9000 Family CLI Configuration Guide for information on port number allocation. Use the no shutdown command to enable the interface. The channel-group auto command enables autocreation of port channels. If autocreation of port channels is enabled for an interface, you must first disable this configuration before downgrading to earlier software versions or before configuring the interface in a manually configured channel group. Examples The following example configures ports 1 to 4 in Fibre Channel interface 9: switch# config terminal Enter configuration commands, one per line. End with CNTL/Z. switch(config)# int fc9/1 - 4 The following example enables the Fibre Channel interface: switch# config terminal switch(config)# interface fc1/1 switch(config-if)# no shutdown The following example assigns the FICON port number to the selected Fibre Channel interface: switch# config terminal switch(config)# interface fc1/1 switch(config-if)# ficon portnumber 15 Related Commands Command show interface shutdown Description Displays an interface configuration for a specified interface. Disables and enables an interface. 11-24 Cisco MDS 9000 Family Command Reference OL-18089-01, Cisco MDS NX-OS Release 4.x