HP Cisco MDS 9020 Cisco MDS 9100 Series Hardware Installation Guide (OL-17951- - Page 37

Cisco MDS 9134 Switch or the Cisco MDS 9124 Switch, see,

Get HP Cisco MDS 9020 - Fabric Switch PDF manuals and user guides View all HP Cisco MDS 9020 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Chapter 2 Installing the Cisco MDS 9100 Series Installing the Switch in a Cabinet or Rack Send documentation comments to [email protected] Step 5 Insert the switch into the rack: a. By using both hands, position the switch with the back of the switch between the front rack-mounting rails as shown in Figure 2-4. If you are using the notched rails, for the Cisco MDS 9134 Switch or the Cisco MDS 9124 Switch, see Figure 2-5. b. Align the two C brackets on either side of the switch with the slider rails installed in the rack. Slide the C brackets onto the slider rails, and then gently slide the switch all the way into the rack. If the switch does not slide easily, try realigning the C brackets on the slider rails. Figure 2-4 Sliding the Cisco MDS 9100 Series onto the Slider Rails 91632 OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide 2-9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
Send documentation comments to [email protected]
2-9
Cisco MDS 9100 Series Hardware Installation Guide
OL-17951-02
Chapter 2
Installing the Cisco MDS 9100 Series
Installing the Switch in a Cabinet or Rack
Step 5
Insert the switch into the rack:
a.
By using both hands, position the switch with the back of the switch between the front
rack-mounting rails as shown in
Figure 2-4
. If you are using the notched rails, for the
Cisco MDS 9134 Switch or the Cisco MDS 9124 Switch, see
Figure 2-5
.
b.
Align the two C brackets on either side of the switch with the slider rails installed in the rack. Slide
the C brackets onto the slider rails, and then gently slide the switch all the way into the rack. If the
switch does not slide easily, try realigning the C brackets on the slider rails.
Figure 2-4
Sliding the Cisco MDS 9100 Series onto the Slider Rails
91632