HP Cisco MDS 9020 Cisco MDS 9100 Series Hardware Installation Guide (OL-17951- - Page 7

Send documentation comments to [email protected] New and Changed Information This Cisco MDS 9100 Series Hardware Installation Guide applies to Cisco MDS NX-OS Release 4.1(1b) and earlier Cisco MDS SAN-OS releases. Table 1 lists the new and changed features available with each supported Cisco MDS NX-OS release and SAN-OS release for the Cisco MDS 9100 Series, with the latest release first. Note As of NX-OS Release 4.1(1b), SAN-OS has been changed to NX-OS. References to SAN-OS releases before 4.1(1b) still apply. Table 1 Documented Features for the Cisco MDS 9100 Series Feature Description Changed in Release The new DC power supply Description of removing and installing the new DC power supply. Not release specific The Cisco MDS 9120 and the Cisco MDS 9140 switch support Note that states that the Cisco MDS 9120 and the Cisco MDS 9140 Fibre Channel switches are not supported on NX-OS Release 4.1(1b). 4.1(1b) Cisco MDS Fibre Channel Bladeswitch overview Description of the Cisco MDS Fibre Channel Bladeswitch for IBM BladeCenter. 3.3(1a) Cisco MDS 9134 Switch overview Description of NPIV support. 3.2(2c) Cisco MDS 9124 Switch overview Description of NPIV support. 3.2(2c) Cisco MDS 9134 Switch overview Description and illustrations of the 3.2(1) 32-port 4-Gbps and 2-port 10-Gbps Cisco MDS 9134 Switch. Where Documented Installing the Cisco MDS 9100 Series chapter. Product Overview chapter. Product Overview chapter. Product Overview chapter. Product Overview chapter. Product Overview chapter. OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide vii