HP Cisco MDS 9020 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 1151

Chapter 51 Configuring IP Services Multiple VSAN Configuration Send documentation comments to [email protected] Figure 51-3 Overlay VSAN Configuration Example Physical Fibre Channel Fabric Int vsan10 - 10.10.10.88 VSAN HR Int vsan10 - 10.10.10.124 IP default gateway 10.10.10.34 VSAN 10 Int vsan10 - 10.10.10.35 Int vsan10 - 10.10.10.34 VSAN ENG 172.23.84.74 mgmt 0 172.23.84.86 NMS IP cloud ip route 10.10.10.0 255.255.255.0 172.23.93.74 79544 Multiple VSAN Configuration More than one VSAN can be used to segment the management network in multiple subnets. An active interface must be present on the switch for the VSAN interface to be enabled. To configure multiple VSANs, follow these steps: Step 1 Step 2 Step 3 Step 4 Add the VSAN to the VSAN database on any switch in the fabric. Create a VSAN interface for the appropriate VSAN on any switch in the fabric. Assign an IP address on every VSAN interface on the same subnet as the corresponding VSAN. Define the multiple static routes on the Fibre Channel switches and the IP cloud (see Figure 51-4). OL-17256-03, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Fabric Manager Configuration Guide 51-7