HP Cisco MDS 9020 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 810

Enabling FIPS Mode Chapter 38 Configuring FIPS Send documentation comments to [email protected] Enabling FIPS Mode To enable FIPS mode using Fabric Manager, follow these steps: Step 1 Expand Switches from the Physical Attributes pane. Expand Security and then select FIPS. You see the FIPS activation details in the Information pane as shown in Figure 38-1. Figure 38-1 FIPS Activation in Fabric Manager Step 2 Step 3 Step 4 Check the ModeActivation check box next to the switch for which you want to enable FIPS mode. Click Apply Changes to commit and distribute these changes. Click Undo Changes to discard any unsaved changes. To enable FIPS mode using Device Manager, follow these steps: Step 1 Choose Physical > System or right-click and select Configure. You see the System dialog box as shown in Figure 38-2. Figure 38-2 System Dialog Box Step 2 Check the FIPSModeActivation check box to enable FIPS mode on the selected switch. 38-2 Cisco MDS 9000 Family Fabric Manager Configuration Guide OL-17256-03, Cisco MDS NX-OS Release 4.x