HP Cisco MDS 9020 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 632

Manual IVR Configuration Chapter 29 Configuring Inter-VSAN Routing Send documentation comments to [email protected] Note You can only use AFID configuration when the VSAN topology mode is automatic. In user-configured VSAN topology mode, the AFIDs are specified in the VSAN topology configuration itself and a separate AFID configuration is not needed. Configuring Default AFIDs To configure default AFIDs using Fabric Manager, follow these steps: Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Expand All VSANs and then select IVR in the Logical Domains pane. You see the IVR configuration in the Information pane. Click the Default Fabric ID tab to display the existing default AFIDs. Click the Create Row icon to create a default AFID. Check the check boxes next to each switch involved in IVR that you want to use this default AFID. Provide a name for each SwitchWWN and set the default Fabric ID. Click Create to create this entry. Repeat Step 1 through Step 6 for all default AFIDs that you want to configure in your IVR topology. Configuring Individual AFIDs To configure individual AFIDs using Fabric Manager, follow these steps: Step 1 Expand All VSANs and then select IVR in the Logical Domains pane. You see the IVR configuration in the Information pane. Figure 29-5 Fabric ID Tab Step 2 Click the Fabric ID tab to display the existing AFIDs (see Figure 29-5). Step 3 Click the Create Row icon to create an AFID. 29-12 Cisco MDS 9000 Family Fabric Manager Configuration Guide OL-17256-03, Cisco MDS NX-OS Release 4.x