HP Cisco MDS 9020 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 1380

Other Chapter 67 Management Software FAQ Send documentation comments to [email protected] Table 67-1 Fabric Manager and Device Manager Color Definitions (continued) Fabric Manager Color Green Square with Mode (e.g., F, T, TE, U/I for FICON) Orange Square with Mode Orange Cross Brown Square Light Gray Square Red Cross Red Square No Square or Black Square Definition Port up. Trunk incomplete. Ols or Nos received. Port is administratively down. Port is not manageable. HardwareFailure/LoopbackDiagFailure/LinkFail ure Any other kind of configuration failure. Port not yet configured. Table 67-2 Device Manager Tooltip Definitions Tooltip adminDown bitErrRTThresExceeded bundleMisCfg channelAdminDown channelConfigurationInProgress channelOperSuspended deniedDueToPortBinding domainAddrAssignFailureIsolation domainInvalidRCFReceived domainManagerDisabled domainMaxReTxFailure domainOtherSideEportIsolation domainOverlapIsolation elpFailureClassFParamErr Definition The port is administratively down. Bit error rate too high. Misconfiguration in PortChannel membership detected. This port is a member of a PortChannel and that PortChannel is administratively down. This port is undergoing a PortChannel configuration. This port is a member of a PortChannel and its operational parameters are incompatible with the PortChannel parameters. Suspended due to port binding. The elected principal switch is not capable of performing domain address manager functions so no Nx_port traffic can be forwarded across switches, hence all Interconnect_Ports in the switch are isolated. Invalid RCF received. Domain manager is disabled. Domain manager failure after maximum retries. The peer E port is isolated. There is a overlap in domains while attempting to connect two existing fabrics. Isolated for ELP failure due to class F parameter error. 67-14 Cisco MDS 9000 Family Fabric Manager Configuration Guide OL-17256-03, Cisco MDS NX-OS Release 4.x