HP Cisco MDS 9020 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 640

Manual IVR Configuration Chapter 29 Configuring Inter-VSAN Routing Send documentation comments to [email protected] Step 1 Expand All VSANs and then select IVR in the Logical Domains pane. You see the IVR configuration in the Information pane. Figure 29-12 FCID Tab Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 Click the FCID tab. Click the Create Row icon to create an FC ID (see Figure 29-12). Select the switch for which you are configuring the virtual FC ID to be used to represent a device in a specific VSAN (current VSAN). Enter the current fabrc in the Current Fabric ID field for the fcdomain database. Enter the current VSAN in the Current VSAN ID field for the fcdomain database. Enter the pWWN. Click the drop-down menu to select the FC ID to map to the pWWN you selected. Click Create to create this new row. Configuring IVR Logging Levels To configure the severity level for logging messages from the IVR feature using Fabric Manager, follow these steps: Step 1 Step 2 Step 3 Step 4 Expand Switches > Events and then select Syslog from the Physical Attributes pane. Click the Severity Levels tab. Click the Facility column header to sort the table by facility name. Select the severity level at which the IVR logs system messages from the Severity drop-down menu (see Figure 29-13). 29-20 Cisco MDS 9000 Family Fabric Manager Configuration Guide OL-17256-03, Cisco MDS NX-OS Release 4.x