HP Cisco MDS 9020 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 829

Chapter 39 Configuring Users and Common Roles SSH Services Send documentation comments to [email protected] Generating the SSH Server Key Pair To generate the SSH server key pair, follow these steps: Step 1 Expand Switches > Security and then select SSH and Telnet. You see the configuration shown in Figure 39-10 in the Information pane. Figure 39-10 SSH and Telnet Configuration Step 2 Click Create Row. You see the SSH and Telnet Key Create dialog box shown in Figure 39-11. Figure 39-11 Create SSH and Telnet Dialog Box Step 3 Step 4 Step 5 Step 6 Check the switches you want to assign to this SSH key pair. Choose the key pair option type from the listed Protocols. The listed protocols are SSH1, SSH2(rsa), and SSH2(dsa). Set the number of bits that will be used to generate the key pairs in the NumBits drop-down menu. Click Create to generate these keys or click Close to discard any unsaved changes. Note 1856 DSA NumberKeys are not supported by switches that running Cisco MDS NX-OS software version 4.1(1) and later. OL-17256-03, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Fabric Manager Configuration Guide 39-17