HP Cisco MDS 9020 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 610

DPVM Chapter 28 Creating Dynamic VSANs Send documentation comments to [email protected] Note You must click on the CFS tab inorder to activate the other tabs Step 3 Click the Config Database tab and then click the Create Row to insert a new entry. You see the Create Config Database dialog box shown in Figure 28-6. Figure 28-6 Create Config Database Step 4 Step 5 Step 6 Choose an available WWN and VSAN combination or fill in the pWWN and Login VSAN fields. Click Create to save these changes in the config or pending database or click Close to discard any unsaved changes. Click the CFS tab and select the Config Action drop-down menu for the master database. You see the options shown in Figure 28-7. Figure 28-7 Config Action Drop-down Menu Step 7 Select commit from the drop-down menu to distribute these changes or abort to discard the changes. 28-6 Cisco MDS 9000 Family Fabric Manager Configuration Guide OL-17256-03, Cisco MDS NX-OS Release 4.x