HP Cisco MDS 9020 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 1352

Locating Other Switches Chapter 66 Troubleshooting Your Fabric Send documentation comments to [email protected] Figure 66-9 Run CLI Commands Status Step 6 Click Close to close the dialog box. Adjusting for Daylight Savings Time Note Starting in 2007, daylight savings time in the United States starts on the second Sunday in March and ends on the first Sunday in November. You can use the Run CLI Commands feature in Fabric Manager to adjust the time change configuration in your switches. Enter the following commands in the Command(s) text box. config t no clock summer-time clock summer-time daylight_timezone_name 2 Sunday March 02:00 1 Sunday November 02:00 60 exit Locating Other Switches The Locate Switches option uses SNMPv2 and discovers devices responding to SNMP requests with the read-only community string public. You can use this feature if: • You have third-party switches that do not implement the FC-GS3 FCS standard that provides management IP addresses. • You want to locate other Cisco MDS 9000 switches in the subnet but are not physically connected to the fabric (and therefore cannot be found via neighbors). 66-12 Cisco MDS 9000 Family Fabric Manager Configuration Guide OL-17256-03, Cisco MDS NX-OS Release 4.x