HP Cisco MDS 9020 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 336

Using the Server Admin FlexAttach Wizards Chapter 14 Configuring FlexAttach Virtual pWWN Send documentation comments to [email protected] Step 5 Step 6 Repeat Step 3 through Step 4 for each switch. Click the PWWN to vPWWN tab to configure pWWN to vPWWN mapping. The Advanced Configuration window is displayed. (Figure 14-13) Figure 14-13 Pre-Configure Server - PWWN to vPWWN Configuration Step 7 From the Select Switch drop-down list, select the switch to display the existing pWWN to Virtual PWWN mapping table for the CFS region to which the switch belongs, and then follow these steps to add vPWWN to vPWWN automap entries: a. Click Add Row to display the PWWN to vPWWN dialog box. b. Enter the pWWN and the corresponding virtual pWWN. c. Click Create to add the mapping list. Note To delete an existing mapping, select the row, and then click Delete Row. Only one pWWN to vPWWN table can be updated at a time. To update the table for each CFS region, perform Step 6 though Step 8 for a switch from each CFS region. Step 8 Click Finish to complete the configurations for each port. 14-14 Cisco MDS 9000 Family Fabric Manager Configuration Guide OL-17256-03, Cisco MDS NX-OS Release 4.x