HP Cisco MDS 9020 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 1243

Chapter 59 Configuring RMON Create RMON Alarms in Fabric Manager Send documentation comments to [email protected] Figure 59-17 Create RMON Thresholds Events Dialog Box Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 Configure the RMON threshold event attributes by choosing the type of event (log, snmptrap, or logandtrap). Increment the index. If you try to create an event with the existing index, you see a duplicate entry error message. (Optional) Provide a description and a community. Click Create, then close this dialog box. Verify that your event is listed in the remaining RMON Thresholds dialog box. Click Close to close the RMON Thresholds dialog box. Managing RMON Alarms To view the alarms that have already been enabled using Device Manager, follow these steps: Step 1 Step 2 Choose Admin > Events > Threshold Manager and click More in the Threshold Manager dialog box. Click the Alarms tab. You see the RMON Thresholds dialog box as shown in Figure 59-18. Figure 59-18 RMON Thresholds Dialog Box OL-17256-03, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Fabric Manager Configuration Guide 59-15