HP Cisco MDS 9020 Cisco MDS 9000 Family Fabric Manager Configuration Guide - R - Page 286

Verifying the Module Status Chapter 12 Initial Configuration Send documentation comments to [email protected] Step 3 Double-click the Logical Name of the switch you want to change in the Information pane. You see the name highlighted with a blinking cursor next to it. Figure 12-1 Changing the Logical Name of a Switch Step 4 Step 5 Step 6 Type the new name of the switch (see Figure 12-1). Click the Apply Changes icon. Right-click the Fabric pane map and choose Refresh to see your changes. . Verifying the Module Status Before you begin configuring the switch, you need to ensure that the modules in the chassis are functioning as designed. To verify the status of a module at any time, follow these steps: Step 1 Step 2 Expand SAN in the Logical Domains pane, then select a fabric or a VSAN from the Logical Domains pane. Expand Switches and choose Hardware in the Physical Attributes pane. You see the contents of the Inventory tab in the Information pane shown in Figure 12-2. Figure 12-2 Inventory of a Selected Module Step 3 Click the Card Module Status tab. You see the status in the Oper Status column of each module in each switch of the SAN, fabric, or VSAN you selected. 12-2 Cisco MDS 9000 Family Fabric Manager Configuration Guide OL-17256-03, Cisco MDS NX-OS Release 4.x