HP Cisco MDS 9124 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 1387

Chapter 22 Show Commands show port-monitor active Send documentation comments to [email protected] show port-monitor active To display the details of all operationally active policies, use the show port-monitor active command. show port-monitor active Syntax Description This command has no arguments or keywords. Defaults None. Command Modes EXEC mode. Command History Release NX-OS 4.1(1b) Modification This command was introduced. Usage Guidelines Policies can be either operationally active or administratively active as shown by the show Port-monitor active command. An administratively active policy is not active on the line card and can be activated operationally by enabling the port monitor. Examples The following example shows how to display the details of all operationally active policies: switch# show port-monitor active Policy Name : default Admin status : Active Oper status : Active Port type : All Ports Counter Threshold Interval Rising Threshold event Falling Threshold event In Use ------- ------ Link Loss Delta 60 5 4 1 4 Yes Sync Loss Delta 60 5 4 1 4 Yes Protocol Error Delta 60 1 4 0 4 Yes Signal Loss Delta 60 5 4 1 4 Yes Invalid Words Delta 60 1 4 0 4 Yes Invalid CRC's Delta 60 5 4 1 4 Yes RX Performance Delta 60 2147483648 4 524288000 4 Yes TX Performance Delta 60 2147483648 4 524288000 4 Yes State Change Delta 60 1 4 0 4 Yes switch# OL-18089-01, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Command Reference 22-319