HP Cisco MDS 9124 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 1413

Chapter 22 Show Commands show role Send documentation comments to [email protected] show role To display roles (and their associated rules) configured on the switch, including those roles that have not yet been committed to persistent storage, use the show role command. show role [name string | pending | pending-diff | session status | status] Syntax Description name string pending pending-diff session status status Specifies a name of the role. Displays uncommitted role configuration for fabric distribution. Displays the differences between the pending configuration and the active configuration. Displays the session status for a role. Displays the status of the latest Cisco Fabric Services (CFS) operation. Defaults None. Command Modes EXEC mode. Command History Release 1.0(2) 2.0(x) Modification This command was introduced. Added the pending, pending-diff, session, and status options. Usage Guidelines The rules are displayed by rule number and are based on each role. All roles are displayed even if role name is not specified. Only network-admin role can access this command. Examples The following example shows how to display information for all roles. switch# show role Role: network-admin Description: Predefined Network Admin group. This role cannot be modified Access to all the switch commands Role: network-operator Description: Predefined Network Operator group. This role cannot be modified Access to Show commands and selected Exec commands Role: svc-admin Description: Predefined SVC Admin group. This role cannot be modified Access to all SAN Volume Controller commands Role: svc-operator Description: Predefined SVC Operator group. This role cannot be modified Access to selected SAN Volume Controller commands OL-18089-01, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Command Reference 22-345