HP Cisco MDS 9124 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 794

member (ivr zone configuration) Chapter 15 M Commands Send documentation comments to [email protected] member (ivr zone configuration) To add a member name to an Inter-VSAN Routing (IVR) zone, use the member command in IVR zone configuration submode. To remove a member name from an fcalias, use the no form of the command. member {device-alias aliasname {lun lun-id vsan vsan-id autonomous-fabric-id afid | vsan vsan-id autonomous-fabric-id afid} | pwwn pwwn-id {lun lun-id vsan vsan-id autonomous-fabric-id afid | vsan vsan-id autonomous-fabric-id afid}} no member {device-alias aliasname {lun lun-id vsan vsan-id autonomous-fabric-id afid | vsan vsan-id autonomous-fabric-id afid} | pwwn pwwn-id {lun lun-id vsan vsan-id autonomous-fabric-id afid | vsan vsan-id autonomous-fabric-id afid}} Syntax Description device-alias aliasname lun lun-id vsan vsan-id autonomous-fabric-id afid pwwn pwwn-id Specifies the member device alias. Maximum length is 64 characters. Specifies the member LUN ID. The format is 0xhhhh[:hhhh[:hhhh[:hhhh]]], where h is a hexadecimal digit. Specifies the VSAN ID. The range is 1 to 4093. Specifies the AFID to the local VSAN. Specifies the member pWWN ID. The format is hh:hh:hh:hh:hh:hh:hh:hh, where h is a hexadecimal digit. Defaults None. Command Modes IVR zone configuration submode. Command History Release 1.3(1) 2.1(1a) Modification This command was introduced. Added lun parameter. Usage Guidelines You can configure an IVR zone member based on the specified pWWN and LUN value or, based on the specified pWWN, LUN value, and AFID. Note The CLI interprets the LUN identifier value as a hexadecimal value whether or not the 0x prefix is included. Examples The following example shows how to configures an IVR zone member based on the device alias VSAN, and the AFID: 15-8 Cisco MDS 9000 Family Command Reference OL-18089-01, Cisco MDS NX-OS Release 4.x