HP Cisco MDS 9124 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 97

Chapter 2 A Commands aaa authentication iscsi default Send documentation comments to [email protected] aaa authentication iscsi default To configure the iSCSI authentication method, use the aaa authentication iscsi default command in configuration mode. To negate the command or revert to factory defaults, use the no form of this command. aaa authentication iscsi default {group group-name [none] | none} | local [none] | none}} no aaa authentication iscsi default {group group-name [none] | none} | local [none] | none}} Syntax Description group group-name local none Specifies the group name. The group name is a maximum of 127 characters. Specifies local user name authentication (default). Specifies no authentication. Defaults Local user name authentication. Command Modes Configuration mode. Command History Release 1.3(1) Modification This command was introduced. Usage Guidelines The local option disables other authentication methods and configures local authentication to be used exclusively. Specify the currently configured command preceded by a no in order to revert to the factory default. Examples The following example enables all iSCSI authentication to be performed using remote TACACS+ servers which are members of the group called TacServers, followed by the local authentication: switch# config terminal switch(config)# aaa authentication iscsi default group TacServer The following example reverts to the local authentication method (default): switch(config)# no aaa authentication iscsi default group TacServer Related Commands Command Description show aaa authentication Displays the configured authentication methods. OL-18089-02, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Command Reference 2-5