HP Cisco MDS 9124 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 800

mkdir Chapter 15 M Commands Send documentation comments to [email protected] mkdir To create a directory in the Flash file system, use the mkdir command in EXEC mode. mkdir directory Syntax Description directory Name of the directory to create. Defaults None. Command Modes EXEC Command History Release 1.0(2) Modification This command was introduced. Usage Guidelines This command is only valid on Class C Flash file systems. You can specify whether to create the directory on bootflash:, slot0, or volatile:. If you do not specify the device, the switch creates the directory on the current directory. Examples The following example creates a directory called test in the slot0: directory: switch# mkdir slot0:test The following example creates a directory called test at the current directory level. If the current directory is slot0:mydir, this command creates a directory called slot0:mydir/test. switch# mkdir test Related Commands Command dir rmdir Description Displays a list of files on a file system. Removes an existing directory in the Flash file system. 15-14 Cisco MDS 9000 Family Command Reference OL-18089-01, Cisco MDS NX-OS Release 4.x