HP Cisco MDS 9124 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 1454

show sprom Chapter 22 Show Commands Send documentation comments to [email protected] show sprom Command Description span session source interface Configures the SPAN traffic in both ingress (rx) and egress (tx) directions. To display vendor ID, product component attributes, serial number information that can be used to track field replacable units, use the show sprom command. show sprom {backplane backplane-index | clock clock-module-index | fan | mgmt-module | module module-number sprom-index | powersupply powersupply-index | sup} Syntax Description backplane backplane-index Displays attributes that can be used to uniquely identify a switch. The range is 1 to 2. clock clock-module-index Displays attributes of the clock module. There are two clock modules in a switch. This module is absent in MDS9216 type switch. The range is 1 to 2. fan Displays attributes that uniquely identified fan. mgmt-module Displays attributes of management module. This module is only present in MDS9216 type switch. module module-number Displays Vendor ID, product's component attributes for the given switching sprom-index module. There can be up to 4 sub-components in a module. Each of them will have a SPROM associated with it. powersupply powersupply-index Displays attributes of the first or the second power-supply. This contains information about the powersupply capacity in watts when it is used in 110Volts and 220Volts respectively. This information is used for power-budget allocation. The range is 1 to 2. sup Displays Vendor ID, product's component attributes for the current supervisor module Defaults None. Command Modes EXEC mode. Command History Release 1.0(2) Modification This command was introduced. 22-386 Cisco MDS 9000 Family Command Reference OL-18089-01, Cisco MDS NX-OS Release 4.x