HP Cisco MDS 9124 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 471

Chapter 6 Debug Commands debug tcap Send documentation comments to [email protected] debug tcap To enable debugging the exception logger, use the debug tcap command in EXEC mode. To disable a debug command, use the no form of the command or use the no debug all command to turn off all debugging. debug tcap {demux | deque | error | info | init} no debug tcap {demux | deque | error | info | init} Syntax Description demux deque error info init Enables debugging for terminal capture demux functions. Enables debugging for terminal capture deque events. Enables debugging for terminal capture errors. Enables debugging for terminal capture information. Enables debugging for terminal capture initialization. Defaults Disabled. Command Modes EXEC mode. Command History Release 1.0(2) Modification This command was introduced. Usage Guidelines Use this command to debug terminal capture utility events and information. Examples The following example displays the system output when the debug tcap demux command is issued: switch# debug tcap demux Related Commands Command no debug all Description Disables all debugging. OL-18089-01, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Command Reference 6-121