HP Cisco MDS 9124 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 1410

show rmon Chapter 22 Show Commands Send documentation comments to [email protected] show rmon To display the remote monitoring (RMON) configuration or onboard log, use the show rmon command. show rmon {alarms | events | hcalarms | logs} Syntax Description alarms events hcalarms logs Displays the configured 32-bit RMON alarms. Displays the configured RMON events. Displays the configured 64-bit high-capacity (HC) RMON alarms. Displays the RMON event logs. Defaults None. Command Modes EXEC mode Command History Release 2.0(x) 2.1(2) 3.0(1) Modification This command was introduced. Added the logs option. Added the hcalarms option. Usage Guidelines None. Examples The following example displays the configured RMON alarms. switch# show rmon alarms Alarm 20 is active, owned by test Monitors 1.3.6.1.2.1.2.2.1.16.30 every 30 second(s) Taking delta samples, last value was 17 Rising threshold is 15, assigned to event 1 Falling threshold is 0, assigned to event 0 On startup enable rising or falling alarm The following example displays the configured RMON events. switch# show rmon events Event 4 is active, owned by administrator@london_op_center Description is WARNING(4) Event firing causes log and trap to community public, last fired 03:32:43 22-342 Cisco MDS 9000 Family Command Reference OL-18089-01, Cisco MDS NX-OS Release 4.x