HP Color LaserJet Enterprise CM4540 Service Manual - Page 663

Use manual print modes Try the following multi-purpose (MP) modes to see if they solve the image-quality problems. These options can be found in the Adjust Paper Types and Optimize submenus under the Print Quality menu on the control panel. Table 3-30 MP modes under the Adjust Paper Types sub menu Print Mode ● Auto Sense Mode ● Normal mode ● Light Mode ● Light Rough Mode ● Heavy Mode ● Extra Heavy Mode ● Card Stock Mode ● Heavy Glossy Mode ● X-Heavy Glossy Mode ● Card Glossy Mode ● Rough Mode ● Transparency Mode ● Transparency 2 Mode ● 4 mm trans mode ● Tough Mode ● Label Mode ● Envelope Mode Resistance Mode Humidity Mode NOTE: Not all print modes are available for all paper types. Set to Up to resolve print-quality issues caused by poor secondary transfer in low-humidity environments with resistive or rough surface media. With glossy film, set to High when the product is in a highhumidity environment and print-quality defects occur on HP Tough Paper or Opaque film. With transparencies, set to High when the product is in a high-humidity environment and print-quality defects occur on color transparencies on the first page of a print job. With all other paper types, set to High when the product is in a high-humidity environment and light density occurs on the first page of a print job. ENWW Use manual print modes 611