HP DL360 HP Factory-Installed Operating System Software for Microsoft Windows - Page 25

8. Enter the following path in the Device Driver Wizard field, then click OK: C:\HPDRVRS The driver search results should display the appropriate device. IMPORTANT: If an incorrect device appears, click Back and reselect the correct device. 9. Click Next to install the driver. 10. Click Finish>Close to return to the Computer Management screen. The tape driver installation is complete. The tape device now appears in the Tape Drive category on the Computer Management screen. Medium Changer If the tape drive has a medium changer, the driver for the medium changer must be installed. IMPORTANT: The medium changer is listed on the Computer Management screen as an Unknown Medium Changer until the correct driver is installed. To install the medium changer driver: 1. Select Unknown Medium Changer from under the Medium Changers category in the Computer Management screen device list. 2. Follow the procedure described in the previous section, "Installing Tape Drives," to install the medium changer. Installing Client Printer Drivers The client printer drivers are preinstalled in the Printers directory located on the disk drive. When installing printer support for client operating systems, supply the path C:\PRINTERS. For additional information on installing drivers for network shared printers, refer to the "Installing Printer Drivers" section of the Help file, which can be accessed by clicking Start>Help. HP Factory-Installed Operating System Software for Microsoft Windows 2000 Server User Guide 25