HP DL580 ProLiant DL580 Generation 4 Maintenance and Service Guide - Page 28

The release latches will lock into place when the rails are fully extended. - dvd drive

Get HP DL580 - ProLiant - G4 PDF manuals and user guides
UPC - 882780616011
View all HP DL580 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

• PPMs • Memory boards • DIMMs • DVD drive • Diskette drive • Hard drives To extend the server from the rack: 1. Release the two levers on the lower outside corners of the rack. 2. If the server is in a rack and in the shipping configuration, remove the two shipping screws directly behind the levers. 3. Extend the server on the rack rails until the server rail-release latches engage. NOTE: The release latches will lock into place when the rails are fully extended. WARNING: To reduce the risk of personal injury or equipment damage, be sure that the rack is adequately stabilized before extending a component from the rack. WARNING: To reduce the risk of personal injury, be careful when pressing the server railrelease latches and sliding the server into the rack. The sliding rails could pinch your fingers. Removal and replacement procedures 28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
Removal and replacement procedures
28
•
PPMs
•
Memory boards
•
DIMMs
•
DVD drive
•
Diskette drive
•
Hard drives
To extend the server from the rack:
1.
Release the two levers on the lower outside corners of the rack.
2.
If the server is in a rack and in the shipping configuration, remove the two shipping screws directly
behind the levers.
3.
Extend the server on the rack rails until the server rail-release latches engage.
NOTE:
The release latches will lock into place when the rails are fully extended.
WARNING:
To reduce the risk of personal injury or equipment damage, be sure that the rack
is adequately stabilized before extending a component from the rack.
WARNING:
To reduce the risk of personal injury, be careful when pressing the server rail-
release latches and sliding the server into the rack. The sliding rails could pinch your fingers.