HP DL580 ProLiant DL580 Generation 4 Maintenance and Service Guide - Page 42
Removing a PCI-X Hot Plug expansion board
UPC - 882780616011
View all HP DL580 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
5. Remove the PCI-X Hot Plug basket ("Removing the PCI-X Hot Plug basket" on page 41). To replace the component, reverse the removal procedure. Removing a PCI-X Hot Plug expansion board 1. Extend or remove the server from the rack ("Extending the server from the rack" on page 27, "Remove the server from the rack" on page 29). 2. Remove the access panel ("Removing the access panel" on page 29). 3. Press the PCI-X Hot Plug button to remove power from the slot. When the green power LED on the slot stops flashing, power has been removed from the slot. 4. Unlock the retaining clip (for full-length expansion boards). 5. Open the latch, and remove the board from the server. CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all expansion slots have either an expansion slot cover or an expansion board installed. Removal and replacement procedures 42