HP Dragonfly Folio 13.5 Maintenance and Service Guide - Page 21
Inserting a nano SIM card, from the computer and insert the card
View all HP Dragonfly Folio 13.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Inserting a nano SIM card To insert a nano SIM card, follow these steps. 1. Turn off the computer by using the Shut down command. 2. Position the computer display-side up on a flat surface. 3. Press in gently on the SIM card access tray to disengage the SIM lock, and the tray will pop out of the slot (1). 4. Remove the tray (2) from the computer and insert the card (3). 5. Replace the tray in the computer. Press in gently on the tray (4) until it is firmly seated. To remove the SIM card, press in gently on the SIM card access tray to disengage the SIM lock, and the tray will pop out of the slot. Remove the SIM card. Replace the tray in the computer and press in gently on the tray until it is firmly seated. Inserting a nano SIM card 15
Inserting a nano SIM card
To insert a nano SIM card, follow these steps.
1.
Turn off the computer by using the
Shut down
command.
2.
Position the computer display-side up on a flat surface.
3.
Press in gently on the SIM card access tray to disengage the SIM lock, and the tray will pop out of the slot
(1)
.
4.
Remove the tray
(2)
from the computer and insert the card
(3)
.
5.
Replace the tray in the computer. Press in gently on the tray
(4)
until it is firmly seated.
To remove the SIM card, press in gently on the SIM card access tray to disengage the SIM lock, and the tray will
pop out of the slot. Remove the SIM card. Replace the tray in the computer and press in gently on the tray until
it is firmly seated.
Inserting a nano SIM card
15