HP Dragonfly Folio 13.5 Maintenance and Service Guide - Page 51
Transfer board, Remove the bottom speakers see
View all HP Dragonfly Folio 13.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
4. Remove the speakers from the computer (4). To install the bottom speakers, reverse this procedure. NOTE: When installing the speakers, be sure rubber washers are installed in the screw holes in the speakers. Transfer board To remove the transfer board, use this procedure and illustration. Table 5-9 Transfer board description and part number Description Transfer board Transfer board cable (available in Cable Kit) Spare part number N22942-001 N22929-001 Before removing the transfer board, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 33). 2. Remove the bottom cover (see Bottom cover on page 33). 3. Remove the battery (see Battery on page 42). 4. Remove the bottom speakers (see Bottom speakers on page 44). Remove the transfer board: 1. Disconnect the keyboard cable from the transfer board (1). 2. Disconnect the system board cable from the transfer board (2). 3. Disconnect the touchpad cable from the transfer board (3). 4. Disconnect the backlight cable from the transfer board (4). Transfer board 45