HP Dragonfly Folio 13.5 Maintenance and Service Guide - Page 43
Magnetic pen slot, Prepare the computer for disassembly see
View all HP Dragonfly Folio 13.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
3. Slide the sleeve off the solid-state drive to remove it. 4. Remove the Mylar from both sides of the solid-state drive. Install the Mylar on a new drive. To install the solid-state drive, reverse the removal procedures. NOTE: Solid-state drives are designed with a notch to prevent incorrect insertion. Magnetic pen slot To remove the magnetic pen slot, use this procedure and illustration. Table 5-3 Magnetic pen slot description and part number Description Magnetic pen slot Spare part number N26148-001 Before removing the magnetic pen slot, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 33). 2. Remove the bottom cover (see Bottom cover on page 33). Magnetic pen slot 37
3.
Slide the sleeve off the solid-state drive to remove it.
4.
Remove the Mylar from both sides of the solid-state drive. Install the Mylar on a new drive.
To install the solid-state drive, reverse the removal procedures.
NOTE:
Solid-state drives are designed with a notch to prevent incorrect insertion.
Magnetic pen slot
To remove the magnetic pen slot, use this procedure and illustration.
Table 5-3
Magnetic pen slot description and part number
Description
Spare part number
Magnetic pen slot
N26148-001
Before removing the magnetic pen slot, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly
on page
33
).
2.
Remove the bottom cover (see
Bottom cover
on page
33
).
Magnetic pen slot
37