HP Dragonfly Folio 13.5 Maintenance and Service Guide - Page 69

N23304-001: WUXGA, BrightView

Page 69 highlights

l. Separate the panel from the display and place it next to the display rear cover. m. Disconnect the panel cables by removing the tape from the left connector (1). n. Rotate the locking lever (2). o. Pull the cable out of the connector (3). p. Remove the foil tape from the right two connectors (4). q. Disconnect the cables from the two ZIF connectors on the board (5). Display panels are available as the following spare part numbers: N23302-001: WUXGA, antiglare N23304-001: WUXGA, BrightView Display panel and subcomponents 63

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109

l.
Separate the panel from the display and place it next to the display rear cover.
m.
Disconnect the panel cables by removing the tape from the left connector
(1)
.
n.
Rotate the locking lever
(2)
.
o.
Pull the cable out of the connector
(3)
.
p.
Remove the foil tape from the right two connectors
(4)
.
q.
Disconnect the cables from the two ZIF connectors on the board
(5)
.
Display panels are available as the following spare part numbers:
N23302-001: WUXGA, antiglare
N23304-001: WUXGA, BrightView
Display panel and subcomponents
63