HP Dragonfly Folio 13.5 Maintenance and Service Guide - Page 75
following illustration., When installing a hub board
View all HP Dragonfly Folio 13.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
e. Remove the four Phillips M 2.0 × 2.0 screws (1), and then remove the board (2). f. When installing a hub board, be sure a thermal pad is installed under the board as shown in the following illustration. The hub board is available as spare part number N22937-001 for models with FHD panels and N22938-001 for models with OLED panels. 6. To remove the EC board from the display rear cover: a. Disconnect the cable from the ZIF connector on the board (1). Display panel and subcomponents 69
e.
Remove the four Phillips M 2.0 × 2.0 screws
(1)
, and then remove the board
(2)
.
f.
When installing a hub board, be sure a thermal pad is installed under the board as shown in the
following illustration.
The hub board is available as spare part number N22937-001 for models with FHD panels and
N22938-001 for models with OLED panels.
6.
To remove the
EC board
from the display rear cover:
a.
Disconnect the cable from the ZIF connector on the board
(1)
.
Display panel and subcomponents
69