HP Dragonfly Folio 13.5 Maintenance and Service Guide - Page 74

from the bracket, and then remove the bracket, Remove the two Phillips M 2.0 × 3.0 screws

Get HP Dragonfly Folio 13.5 PDF manuals and user guides View all HP Dragonfly Folio 13.5 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 74 highlights

4. To remove the camera module from the display rear cover: a. Disconnect the two cables from the ZIF connectors on the camera module (1). b. Roll the module up to release it (2). The module is secured with adhesive. The camera module is available as spare part number N23306-001. 5. To remove the hub board from the display rear cover: a. Peel the tape off the connectors (1). b. Remove the two Phillips M 2.0 × 3.0 screws (2) from the bracket, and then remove the bracket (3). c. Disconnect the cables that were under the bracket (4). d. Disconnect the two camera module cables from the ZIF connectors on the board (5). 68 Chapter 5 Removal and replacement procedures for authorized service provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
4.
To remove the
camera module
from the display rear cover:
a.
Disconnect the two cables from the ZIF connectors on the camera module
(1)
.
b.
Roll the module up to release it
(2)
. The module is secured with adhesive.
The camera module is available as spare part number N23306-001.
5.
To remove the
hub board
from the display rear cover:
a.
Peel the tape off the connectors
(1)
.
b.
Remove the two Phillips M 2.0 × 3.0 screws
(2)
from the bracket, and then remove the bracket
(3)
.
c.
Disconnect the cables that were under the bracket
(4)
.
d.
Disconnect the two camera module cables from the ZIF connectors on the board
(5)
.
68
Chapter 5
Removal and replacement procedures for authorized service provider parts