HP E27d User Guide - Page 14
Setting up the monitor, Attaching the monitor stand
View all HP E27d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Setting up the monitor Attaching the monitor stand WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup and proper posture, health, and work habits for computer users. The Safety & Comfort Guide also provides important electrical and mechanical safety information. The Safety & Comfort Guide is available on the Web at http://www.hp.com/ergo. IMPORTANT: To prevent damage to the monitor, do not touch the surface of the LCD panel. Pressure on the panel may cause nonuniformity of color or disorientation of the liquid crystals. If this occurs, the screen will not recover to its normal condition. IMPORTANT: To prevent the screen from getting scratched, defaced, or broken and to prevent damage to the control buttons, position the monitor facedown on a flat surface covered with protective sheet foam or a nonabrasive cloth. 1. Position the monitor facedown on a flat surface covered by a soft clean cloth. 2. Slide the top of the mounting plate on the stand under the upper lip of the recess in the back of the monitor head (1). 3. Lower the bottom of the stand's mounting plate into the recess (2) until it snaps into place. The latch on the bottom of the mounting plate pops up when the stand is locked in place. 6 Chapter 1 Getting started