HP EliteBook 2760p HP EliteBook 2760p Tablet PC - Maintenance and Service Gui - Page 51
Primary memory module, module. The edge of the module opposite the slot rises away from the computer.
View all HP EliteBook 2760p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Primary memory module Description 1 GB (PC3-10600, 1333 MHz, DDR3) 2 GB (PC3-10600, 1333 MHz, DDR3) 4 GB (PC3-10600, 1333 MHz, DDR3) 8 GB (PC3-10600, 1333 MHz, DDR3) Spare part number 639738-001 621565-001 621569-001 634091-001 Before removing the memory module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the following components: a. Remove the battery (see Battery on page 41) b. Remove the service access cover (see Service access cover on page 42) Remove the primary memory module: 1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the computer.) 2. Remove the memory module (2) by pulling the module away from the slot at an angle. NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the memory module slot. Component replacement procedures 43