HP EliteBook 2760p HP EliteBook 2760p Tablet PC - Maintenance and Service Gui - Page 81
Remove the Phillips M2.0×3.5 screw, Remove the audio connector board
View all HP EliteBook 2760p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
c. Remove the WLAN module (see WLAN module on page 48) d. Remove the WWAN module (see WWAN module on page 51) e. Remove the keyboard (see Keyboard on page 53) f. Remove the top cover (see Top cover on page 57) g. Remove the display assembly (see Display assembly on page 63) h. Remove the Bluetooth module (see Bluetooth module on page 68) i. Latch assembly (see Latch assembly on page 70) j. Remove the speaker assembly (see Speaker assembly on page 71) Remove the audio connector board: 1. Position the computer right-side up, with the front toward you. 2. Release the ZIF connector (1) that secures the audio board cable to the system board and remove the audio board cable (2). 3. Remove the Phillips M2.0×3.5 screw (3) that secures the audio connector board to the base enclosure and lift the board (4). Reverse this procedure to install the audio connector board. Component replacement procedures 73