HP EliteBook 2760p HP EliteBook 2760p Tablet PC - Maintenance and Service Gui - Page 54
Hard drive, Remove the battery see - ssd
View all HP EliteBook 2760p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Hard drive NOTE: The hard drive spare part kits include the bracket and the screws. Description 320 GB, 7200 rpm, 7 mm (2.5 in) SED hard drive 320 GB, 7200 rpm, 7 mm (2.5 in) hard drive 250 GB, 7200 rpm, 7 mm (2.5 in) hard drive 160 GB solid-state drive (SSD) 128 GB SSD Spare part number 656621-001 656620-001 656619-001 653018-001 653017-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the following components: a. Remove the battery (see Battery on page 41) b. Remove the service access cover (see Service access cover on page 42) Remove the hard drive: 1. Loosen the Phillips M2.5×8.0 captive screw (1) that secures the hard drive bracket to the computer. 2. Grasp the tab on the hard drive and slide it forward to disconnect the hard drive. 46 Chapter 4 Removal and replacement procedures