HP EliteBook 2760p HP EliteBook 2760p Tablet PC - Maintenance and Service Gui - Page 71
Display assembly, Remove the keyboard see
View all HP EliteBook 2760p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Display assembly The display assemblies include two WLAN antenna transceivers and cables and two WWAN antenna transceivers and cables. Description 30.7 cm (12.1 in) WXGA, LED, AntiGlare touch screen display assembly 30.7 cm (12.1 in) WXGA, LED, AntiGlare touch screen display assembly for use outdoors Spare part number 649753-001 649754-001 Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the following components: a. Remove the battery (see Battery on page 41) b. Remove the service access cover (see Service access cover on page 42) c. Remove the WLAN module (see WLAN module on page 48) d. Remove the WWAN module (see WWAN module on page 51) e. Remove the keyboard (see Keyboard on page 53) f. Remove the top cover (see Top cover on page 57) Remove the display assembly: 1. Position the computer upside down, with the rear toward you. 2. Remove the two Torx 9 M2.0×5.0 screws that secure the hinge cover to the computer. Component replacement procedures 63